HOTLINE: +84 979761016
Force and mechanical measuring equipment
MITUTOYO LSM Series FEATURES
0.005mm-diameter ultra-fine wires to 160mmdiameter cylinders can be measured: Seamless measurement range models
A rich assortment of models for diverse measuring applications. The LSM-500S can measure ultra-fine wires as thin as 0.005mm in diameter to a resolution of 0.00001mm, and the LSM-516S can measure cylindrical workpieces with a diameter as large as 160mm.
The LSM-9506 benchtop model combines a display section and measurement section in a single unit.
Ultra-high scanning rate of 3200 scans/sec. The incorporation of a 16-face polygonal mirror and a highprecision motor now makes scanning at 3200 scans per second possible. This formidable capability is ideal, for example, for taking measurements on high-speed production lines or on vibrating workpieces.
Certified accuracy over entire measurement range. range
The specified accuracy over the entire measurement range is certified by the “Traceability System to the International Standard” which Mitutoyo, as a leading manufacturer of precision measurement tools and instruments, has established within its business practices.
Improved resistance to IP64-level environments
The measuring unit has been extensively developed to resist rough measurement environments. As a result, for example, it can operate at an ambient temperature of 45°C. (IP64-level resistance is not guaranteed for the display unit and the LSM-9506.)
DIN-size compact panel-mounted display unit (LSM-5200)
The LSM-5200 display unit is a compact DIN size, allowing it to be mounted in a panel so as to be suitable for mounting in a rack, etc.,
for use on production lines.
Standard I/O output, analog output and RS-232C output interfaces. Wireless capable
The LSM-5200/6200/6900 has a standard I/O and analog output interface to connect it to an operation controller or PLC used on a production line. Also, every model has a standard RS-232C interface for connection to personal computers or printers. Capable of using U-wave wireless system using optional accessories.
QUICKTOOL
Free Quicktool* software simplifies the setup and operation of the LSM-6200/9506/6900. This program can be downloaded from http:www.mitutoyo.jp *For use with customer-supplied PC and RS-232C cable
A laser beam is directed at a polygonal mirror rotating at high speed in exact synchronism with highly stable pulses from the system clock. The reflected beam is rotating clockwise as it sweeps across the input surface of a collimating lens but changes direction to be always horizontal after the lens' exit surface as it moves, or scans, downward. This horizontal beam enters the measuring space and, with no workpiece present, reaches a receiver via a condensing lens to produce an output signal. When a simple workpiece (a cylinder, for example) is put into the measuring space the beam will be interrupted for a time during its sweep and this time, as indicated by clock pulses occurring while the receiver signal is absent, is proportional to the workpiece dimension in the downward direction.
Each transition between the receiver detecting the beam and then not detecting the beam, or vice versa, is called an edge and marks the start and/or end of measuring sections called segments, so that the differences in position of these edges define the length of each segment. The edges and segments generated by a workpiece are numbered sequentially by the instrument and are used when writing programs to extract the required dimensional data
MITUTOYO LSM Series LSM-500S
MITUTOYO LSM Series LSM-501S
MITUTOYO LSM Series LSM-503S
Maintenance and calibration :
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~
