Semiki logo
HOTLINE: +84 979761016
0

Cart

No products in the cart.

Continue shopping
Home / Shop / Electronic industry measuring machine / Electrical characteristics analysis equipment / NF CORP 2326A, ZM2329,ZM2393 fixture set for LCR machine
Product portfolio

NF CORP 2326A, ZM2329,ZM2393 fixture set for LCR machine

Producer:

Test leads and cables for LCR meter ZM2371/ZM2372/ZM2376
General purpose components
Test leads provide 4-terminal measurement. Can measure accurately at low impedance. Kelvin clamp leads allow use of one clamp for two opposite insulated electrodes.
2324 Four-headed alligator clip test lead
2325A (L/M) Kelvin Clamp Test Lead
ZM2392 Kelvin clamp test lead
ZM2391 Three-headed Alligator Clip Test Lead
ZM2363 Conductor Components Test Equipment
Chip Components (Test Equipment)
ZM2394H Chip Test Equipment
ZM2393 Chip Test Equipment
Chip Components (Test Leads)
ZM2366 Chip Component Test Lead
2326A Chip Component Test Lead
DC bias voltage converter
ZM2328 (For LCR meter ZM2371 and ZM2372)
ZM2329 (For LCR meter ZM2376)

NF Corp Japan 

Test Fixtures and Leads
for LCR Meter ZM2371/ZM2372/ZM2376

LCR Meter ZM2371/ZM2372/ZM2376
Benchtop LCR Meter Series that Achieves High-speed, High-precision


Stable Measurements
NF's ZM series LCR meters cover a wide frequency range, from the low-frequency region of 1 mHz up to 5.5 MHz. Supports a wide range of applications, from materials research to component production lines, by means of high-speed, low measurement fluctuations.

Test Fixtures and Leads (sold separately)

Accurate and easy-to-perform measurements

A variety of measurement fixtures are available for various applications.
*Measurement frequencies that take into account errors are recommended.
General-purpose components
Test leads provide 4-terminal measurements. Accurate measurement is possible to low impedance. Kelvin clip leads enable one clip to be used for two electrically insulated opposing electrodes.

2324 Four-terminal alligator-clip test leads
Use these test leads with low-impedance four-terminal components, including those which have separate current supply terminals and voltage test terminals.
ZM2391 Three-terminal alligator-clip test leads
A three-terminal type is also available for simpler measurements.
Measurement frequency: ≤ 100 kHz

 


2325AL

2325A (L/M) Kelvin clip test leads
The two test lead clips enable four-terminal connections. The 2325A can be used to test large or unusually shaped components that cannot be easily inserted into the direct test fixture. Select between two types: the standard L type or the M type with smaller clips.
Measurement frequency: ≤ 100 kHz

[M type]

[L type]

 

ZM2392 Kelvin clip test leads
The ZM2392 provides test leads for simpler measurements.
Measurement frequency: ≤ 20 kHz

 

ZM2391 Three-terminal alligator-clip test leads
A three-terminal type is also available for simpler measurements.
Measurement frequency: ≤ 20 kHz

Lead components

ZM2363 Test fixture
Test fixture that makes 4-terminal measurements as easy as inserting the leads into the sample.
To match the size of the components, the spacing of the measurement terminals can be adjusted.
Measurement frequency: ≤ 10 MHz

Chip components (Test Fixture)

Test fixture for measuring surface-mounted components with a 2-terminal connection. Since a cable is not used, stray capacitance and residual impedance are small, enabling accurate open and short correction.

ZM2394H Chip test fixture
Measurement frequency: ≤ 36 MHz
Supported component size: 0603[JIS] / 0201 [EIA] (0.3mm thick) to 14 mm (square)
ZM2393
ZM2393 Chip test fixture
Measurement frequency: ≤ 1.2 MHz
Supported component size:
1608 [JIS] / 0603 [EIA] to 5750 [JIS] / 2220 [EIA]

Chip components (Test Leads)

Chip component test leads in a 3-terminal configuration with shielded measurement contacts.
Stray capacitance is small, enabling easy measurement of small-capacity capacitors.

ZM2366 Chip component test leads
Measurement frequency: ≤ 10 MHz
Tip spacing: 1 to 8 mm (typ.)

 

2326A Chip component test leads
Measurement frequency: ≤ 1.2 MHz
Tip spacing: 10 to 8 mm (typ.)

DC bias voltage adapter

Adapter for applying a DC bias voltage of ±40 V to the sample. This adapter provides easy connection to the LCR meter and test fixture. (4-terminal pair configuration)

ZM2328

ZM2328 (For ZM2371 and ZM2372)

ZM2328

ZM2329 (For ZM2376)

Maintenance and calibration : 

► We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store.

Local Vietnam : SEMIKI Ins

 

DISTRIBUTED BY:

Semiki instrumentation Co., Ltd

Email: sales@semiki.com

Office tel: +84 28 2253 3522

~DOING OUR BEST FOR YOU~

Request a quote
SEMIKI MEASUREMENT EQUIPMENT COMPANY LIMITED
Headquarters:
  • Floor 12 – Tower A2, Viettel Building, 285 Cach Mang Thang Tam, Ward 12, District 10, Ho Chi Minh City, Vietnam
  • Sales@semiki.com
  • +84 979761016
  • Tax code 0313928935
Warranty, maintenance and repair center:
  • 10th Floor, Halo Building, 19-19/2A Ho Van Hue, Ward 9, Phu Nhuan District, HCMC
Representative office in Hanoi:
  • 9th Floor, 3D Building, No. 3 Duy Tan Street, Dich Vong Hau Ward, Cau Giay District, Hanoi City
© 2024 Semiki inc. All rights reserved.

Ask SEMIKI for a quote

Complete the form below to receive a quote from SEMIKI.
You need to enter all information fields below.