Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

NI-9502 Brushless Servo Motor Drive Module C Series

Producer:

Category: SEMIKI measurement solution

C Series Brushless Servo Motor Drive Module—NI‑9502 is a single-axis module that can drive three-phase brushless servo motors. Motor control, traditionally fixed in the drive firmware, is implemented using FPGAs and is fully customizable in the LabVIEW FPGA Module with LabVIEW SoftMotion Module motor control VIs. The NI‑9502 provides an alternative to costly and time-consuming custom drive development or paying a drive vendor for custom firmware. Furthermore, the NI‑9502 eliminates large stand-alone motor drives and cumbersome cabling to enable tightly embedded motion systems.

NATIONAL INSTRUMENTS (ni)

C Series Motor Drive Module

NI-9502

Brushless Servo C Series Motor Drive Module

—The NI‑9502 is a single‑axis module that can drive three-phase brushless servo motors. Motor control, which is traditionally fixed in drive firmware, is implemented using an FPGA and is fully customizable in the LabVIEW FPGA Module with LabVIEW SoftMotion Module motor control VIs. The NI‑9502 provides an alternative to expensive and time-consuming custom drive development or paying a drive vendor for custom firmware. Furthermore, the NI‑9502 eliminates large stand-alone motor drives and unwieldy cabling to enable highly embedded motion systems.

NI-9502 C Series Motor Drive Module

The NI-9502 (Part number: 781282-01) is a C Series Motor Drive Module manufactured by National Instruments. The NI‑9502 is a solo alliance, brushless servo motor drive. This module includes motor outputs for power connections and Hall effect sensor inputs. It also has motor outputs for brushless. It has a motor output current of 4 A continuous/8 A peak. The NI 9502 C Series Module sends back the motor current to the LabVIEW FPGA module. This is currently used for looping or monitoring. With minor changes in the settings, the NI-9502 can operate in different modes. These modes include Trapezoidal or Field Oriented Control (FOC) communication mode.

The NI-9502 is structured with 10 terminal removable screw-terminal connectors, which provide connections for the brushless servo motor signals. It also provides connections for Hall effects sensors. The NI-9502 module has a maximum power supply range from 9 V up to 30 V. This module comes with a built-in COM and chassis ground. The NI 9502 is suitable for applications with high vibrations. The device has a sampling rate of 10 kHz, an ADC resolution of 12 bits, and a peak output power of 0.2 kW. It has a consumption up to 700 mW when in active mode.

The NI-9502 features four LEDs. These LEDs show the status information. The green LED lights up when driving is enabled and in the active output power stage. It flashes when the drive is disabled. The Vsup LED lights up when the DC power supply of the motor is correctly connected. The user LED is customizable. It can be adjusted according to the needs of the application. The drive is disabled when a fault occurs and the Fault LED lights up. The NI-9502 is entered in the chassis while it is in disabled form. Drive can be enabled through the Drive method in software.

The NI device weighs 5.1 oz. It has a recommended operating temperature range of -40 to 70 °C, a storage temperature range of -40 to 85 °C, and a random and sinusoidal operating vibration of 5 grms and 5 g respectively–all with a frequency range of 10 to 500 Hz.