Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

ni USB-4432 5-channel noise and vibration signal collector

Producer: NI

Category: NI data acquisition equipment

102.4 kS/s, 100 dB, 0.8 Hz AC/DC Coupled, 5-Input Sound and Vibration Device
The USB-4432 is designed for audio and level measurement. Four input channels feature integrated electronic signal conditioning (IEPE) for tachometer and packet measurement, and a streamlined anti-aliasing filter automatically adjusts to your sample rate. The fifth channel input does not include IEPE support.
Product code: 780421-01
Maximum number of differential analog input channels: 5
Number of analog output channels: –
Bus Connector: USB 2.0
Analog input connection: AC/DC
Maximum sampling rate: 102.4 kS/s
High pass filter cutoff frequency: 0.1 Hz
Front connection type: BNC, BNC, BNC, BNC, BNC

NATIONAL INSTRUMENTS (ni)

102.4 kS/s, 100 dB, 0.8 Hz AC/DC Coupled, 5-Input

Sound and Vibration Device

102.4 kS/s, 100 dB, 0.8 Hz AC/DC Coupled, 5-Input Sound and Vibration Device
The USB-4432 is designed for sound and vibration measurements. Four of the input channels incorporate integrated electronic piezoelectric (IEPE) signal conditioning for accelerometers and microphones and built-in antialiasing filters that automatically adjust to your sampling rate. The fifth input channel does not include IEPE support.
Part Number: 780421-01

National Instruments USB-4432 Sound and Vibration Device

Maximum Number of Differential Analog Input Channels: 5

Number of Analog Output Channels: –

Bus Connector: USB 2.0

Analog Input Coupling: AC/DC

Maximum Sample Rate: 102.4 kS/s

Highpass Filter Cut-Off Frequency: 0.1 Hz

Front Connection Type: BNC, BNC, BNC, BNC, BNC

The USB-4432 (Part Number: 780421-01) is a Sound and Vibration Device from National Instruments. This model has five differential analog input channels and does not have any analog output channels. The input channels offer 24-bit measurements. This impressive Signal Acquisition Module is used for making measurements from IEPE sensors. The USB-4432 buffers and pre-filters each signal. This process is executed by a 24-bit delta-sigma ADC (analog-to-digital converter). This device can read and write TEDS Class 1 sensor.

The National Instruments NI USB-4432 The device also features a dynamic range of 100 dB. The device's voltage range is -40V and +40V. The device also has ±60V overvoltage protection. The USB-4432 includes three modes of measurement operations which are software-selectable. Two modes with AC-coupling are IEPE-on mode and IEPE-off mode. The third mode is the IEPE-off mode with DC coupling. The NI USB-4432 uses delta-sigma modulation. This is a method of converting signals from analog form to digital form. This method rejects the out-of-band signals and only provides the most accurate and desirable signals.

The NI DAQ USB 4432 has a built-in antialiasing filter, which can easily differentiate between different types of signals. This Sound and Vibration Device is ideal for noise analysis applications, along with vibration analysis applications. This device includes many helpful features like distortion analysis and noise measurements. Another useful feature is sound quality analysis. The NI USB-4432 provides one BNC input connector per channel. This model performs well in extensive working environments.

– SEMIKI is happy to share Technical and Solutions relating to metrology, measuring, precision gages, manufacturing quality control and processes.

For complete product information, visit :

www.semiki.com

www.ni.com.vn

Maintenance and calibration :

► We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store.

Local Vietnam : SEMIKI CORP

DISTRIBUTED BY:

Semiki instrumentation Co., Ltd

Email: sales@semiki.com

Office tel: +84 9797 61016

~DOING OUR BEST FOR YOU~