Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

ni USB-6225 80 channel signal collector

Producer: NI

Category: NI data acquisition equipment

USB-6225 Multi-Function I/O Device 80 AI (16-Bit, 250 kS/s), 2 AO (833 kS/s), Up to 24 DIO USB Multi-Function I/O Device —The USB‑6225 provides analog I/O, digital I/O, two 32-bit counters/timers, and digital triggering. It provides reliable, low-cost DAQ capabilities in a wide range of applications from simple lab automation, research, design verification/checking, and manufacturing testing. You can add sensor and high-voltage measurement capabilities to your device with SCC or SCXI signal conditioning modules. The included NI‑DAQmx driver and configuration utility simplify configuration and measurement.

NATIONAL INSTRUMENTS (ni)

Multifunction I/O Device
Model: USB-6225

Multifunction I/O Device USB-6225 80 AI (16-Bit, 250 kS/s), 2 AO (833 kS/s), Up to 24 DIO USB
—The USB‑6225 offers analog I/O, digital I/O, two 32‑bit counters/timers, and digital triggering. The device delivers low-cost, reliable DAQ capabilities in a wide range of applications from simple applications in laboratory automation, research, design verification/test, and manufacturing test. You can add sensor and high-voltage measurement capability to your device with SCC or SCXI signal conditioning modules. The included NI‑DAQmx driver and configuration utility simplify configuration and measurements.

Features:

Up to 80 Analog Inputs at 16 bits, 1.25 MS/s (1 MS/s or 750 KS/s Scanning)
Up to 4 Analog Outputs at 16 bits, 2.8 MS/s (2 µs full-scale settling)
Up to 48 TTL/CMOS Digital I/O Lines (Up to 32 Hardware-Timed at Up to 1 MHz)
Two 32-bit, 80 MHz Counter/Timers

National Instruments USB-6225 Multifunction I/O Device

The USB-6225 (Part Numbers: 779974-01, 779973-02, 779973-04, 779973-01, 779974-04) is a Multifunction I/O Device created by National Instruments. This device provides superior accuracy along with fast sampling rates. This device has 80 analog input channels. These channels can be used as 80 single-ended channels. The user can also utilize these channels as 40 differential channels. The NI USB-6225 offers 16-bit ADC resolution and the maximum sample rate of 250 kS/s for a single channel. For multiple channels, the maximum sample rate is also 250 kS/s. The timing accuracy of the input channels is 50 ppm of the sample rate. The device has a recommended warm-up time of 30 minutes, and should be calibrated at least once a year.

The USB 6225 NI has different input ranges. The input ranges include ±0.2V, ±1V, ±5V, and ±10V. The value of maximum working voltage for analog inputs of this device is ±11V. The input FIFO size for this device is 4,095 samples. The NI USB-6225 DAQ provides an overvoltage protection for all analog input channels and all sense channels. The input current of this instrument during the overvoltage condition is ±20 mA maximum.

The NI USB-6225 M Series DAQ has two analog output channels. Both channels provide 16 bit DAC resolution. The analog output channels have 16-bit monotonicity. The maximum update rate for one output channel is 833 kS/s. For both channels, the maximum update rate is 740 kS/s. The timing accuracy of the output channels is 50 ppm of the sample rate. The output range of this device is ±10 V. The output impedance is 0.2 Ω. The output channels provide an overdrive protection up to ±25 Volts.

The screw terminal fitted model of the device weighs 2 lb, and measures 10.5 x 6.73 x 1.75 in. in physical dimensions. Also, the Mass termination model weighs 2 lb, and has the physical dimensions: 7.4 x 6.73 x 1.75 in. The NI device has recommended operating and storage temperature ranges of 0 ºC to 45 ºC and -20 ºC to 70 ºC respectively, and a noncondensing humidity range of 10% RH to 90% RH.