Introducing UV-LED01, UV-LED CS01
This is a small, light and convenient measuring device. It is suitable for management measurements at UV-LED equipped facilities in production facilities and in research and development. Please use it to measure the UV irradiance (illumination and total light amount) of UV-LED with high precision.
Features of UV-LED01, UV-LED CS01
- Compatible with popular high power UV-LED light sources.
- It features a flat spectral response ideal for UV-LED measurement.
- It is compatible with a wide range of UV-LED wavelengths within the UVA range.
- Calibration for each measuring wavelength to achieve highly accurate measurements.
- Dedicated UV-LED calibration for highly accurate measurements.
- The calibration system is traceable to national standards.
- These are small, light and handy allowing easy management of the illuminance and integrated light intensity of the irradiator.
- Illuminance (W/cm²), peak illuminance (W/cm²), and total light output (J/cm²) can be easily measured.
- Measurement data can be transferred via RS-232C communication output.
- It has the function of outputting analog voltage signals according to illuminance.
- The receiver can be mounted to a rack or device using an M3 threaded hole
Specifications
| Model |
UV-LED-01 (display) |
UV-LED-CS01 (receiver) |
| Measurement central wavelength |
345nm to 435nm |
| Measurement range [irradiance] |
0.1 mW/cm2 to 20.00 W/cm2 |
| Measurement range [integrated light amount] |
0.1 mJ/cm2 to 9.999 J/cm2 |
| Operating Ambient Temperature |
0℃ to 60℃ |
| Fitting Accuracy |
Within ±1.5% of our UV standard |
| power supply |
2 AA batteries or AC 100 V to 240 V |
| Control Signals |
RS-232C |
| Recorder Output |
DC 2V (at full scale) |
| Receiver cord length |
1.5 m |
| Receiver |
UV-LED-CS01 |
| Light receiving diameter |
φ 1mm |
| size |
71(W) x 151(D) x 29(H) mm |
20(W) x 30(D) x 10(H) mm |
| weight. weight |
130 g |
57 gr |
| *This ultraviolet irradiance meter was developed based on the results of joint research with the National Institute of Advanced Industrial Science and Technology. |
|
Frequency spectrum characteristics
By selecting the wavelength that matches the UV-LED to be measured, the spectral response can be flattened and measurement accuracy can be improved. *Select from the calibrated center wavelengths in 5 nm increments from 345 nm to 435 nm.
Maintenance :
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~
