Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

pH Transmitter With 4-20 mA With Display HI8614LN

Producer: HANNA Instruments

SKU: HANNA-HI8614LN Category: Hanna experimental measuring equipment

The HI8614N is a waterproof pH transmitter designed for use with standard high impedance pH probes with BNC connectors. The signal is then processed by a special high current amplifier, delivering an output current that is proportional to the input signal but independent of changes in voltage of load or cable.

Temperature compensation ensures fast readings, accurate compensation even during sudden temperature fluctuations.

Waterproof design for use in process control.

HI8614LN features an optional LCD backlight, LCD display for easy viewing (no LCD on HI8614N)

Automatic Temperature Compensation (ATC)
Temperature compensation is performed by the ATC (Automatic Temperature Compensation) transmitter circuit when transmitting measurements taken with the supplied temperature probe; if ATC is not required, a fixed resistor can also be substituted for the temperature probe.

BNC connector
The transmitters use a universal BNC socket for quick and secure connection to any electrode with a BNC connector.

Easy calibration
Calibration is performed by adjusting two independent trimmers – slope and offset.

Isolated input
Inputs are isolated from the current loop to eliminate ground loop issues, low insulation cables, multiple electrode connections and common mode voltages up to 100V ensure true differential readings

Flexible to your needs
The transmitter can be connected to any Hanna controller that accepts analog input.

Version with LCD display
The HI8614LN versions allow for easy checking and monitoring of measurement values and easier calibration and maintenance.

SPECIFICATIONS

pH scale	0.00 to 14.00 pH; 4–20 mA
pH resolution	0.01 pH; 0.01 mA
pH Accuracy (@25ºC/77ºF)	±0.02 pH; ±0.02 mA
pH calibration	offset: ±2 pH; ±2.2 mA; slope: 86 to 116%; ±0.5 mA
pH temperature compensation	Default or automatic from 0 to 100°C (32 to 212°F) with HI76608 probe
pH input	10¹² ohms
Exit	4-20 mA (isolated)
Load	max 500 Ohm
Screen	LCD only for HI8614LN
Electricity supply	HI8614N: 18-30 VDC; HI8614LN: 20-36 VDC
Environment	0 to 50°C (32 to 122°F); RH max 95% does not condense
Bark	IP65
Size1	165 x 110 x 71 mm
Mass	1 kg
Supply includes	HI8614LN comes with instruction manual.
Guarantee	12 months