HOTLINE: +84 979761016
Force and mechanical measuring equipment
TECLOCK Japan
Rubber hardness tester GS-719H and GS-719L
Type A durometer, suitable for soft rubber.
Deep hole/long leg type
Durometer
Model:
GS-719H (Type A/φ12mm)
GS-719L ((Type A/φ18mm)
In some cases, such as uneven measuring surfaces or those with narrow flat areas and deep hollow bottoms, suitable results may not be achieved due to the propeller having difficulty in contact.
The deep hole (H) and long shank (L) types enable such measurements to be made with a small or long shank. Both are supplied with a Peak Pointer and upper/lower limiter. The long shank type also complies with DIN 53505.
In some cases, such as the measurement surface of uneven or with a narrow flat area and the bottom of deep hollow, it may be impossible to achieve the proper results because of the difficult contact of the presser foot.
TECLOCK Durometer GS-719H type A
Pic.: TECLOCK durometer GS-719H (Type A /Deep hole ) at Semiki's warehouse
The Deep Hole (H) type and the Long Leg (L) type make such measurements possible with a small or long presser foot. Both are supplied with Peak Pointer and the upper/lower limiters. The Long Leg type meets also to DIN 53505 standard.
Maintenance and calibration :
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store.
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~
Rubber hardness meter
Rubber hardness meter
Rubber hardness meter
Rubber hardness meter
Rubber hardness meter
Rubber hardness meter
Rubber hardness meter
Rubber hardness meter, Plastic and rubber hardness tester, Material hardness measuring device