Semiki logo
HOTLINE: +84 979761016
0

Cart

No products in the cart.

Continue shopping
Home / Shop / SEMIKI measurement solution / TECLOCK GSD-720K electronic rubber hardness tester type D
Product portfolio

TECLOCK GSD-720K electronic rubber hardness tester type D

Producer:

TECLOCK GS-720K is a device used to measure the hardness of shore D rubber, hard rubber materials, the results are displayed on an easy-to-read electronic screen.
Spring Load Value: 0-44450 mN (0-4533 gf)
Indentor Shape: Conical Cone of R0.1mm with 30° angle
Indentor Height: 2.50 mm
Weight: 208 g
Application / Materials: Hard rubber (High hardness)
Conform Standards: JIS K 6253, ISO 7619, ISO 868, ASTM D 2240
Type D(Peak Pointer Type)
Digital Hardness Tester with Peak Hold Function
This is a model with peak hold function (Hold maximum value)
installed
This function is effective for measuring the hardness of Elastomer which
Maximum value cannot be read due to expansion.
The minimum reading is 0.5 and is half that of the analog type.
Measured data can be processed as statistics by connecting to the optional printer SD-763P.

Teclock Digital Durometer

plastic, rubber hardness tester

Model: GSD-720K (shore D durometer)

 

Digital Durometer with Peak Hold Function
This is the model for which peak hold (Maximum value is held) function is mounted.
This is effective to measure hardness of Elastomer of which maximum value is unreadable due to relaxation phenomenon.
Minimum read value is o.5 and it is half of analog type.
Measured data can be treated as statistics by connecting with optional printer SD-763P.

TECLOCK GS-720K shore A Durometer

Spring Load Value: 0-44450 mN (0-4533 gf)
Indentor Shape: Conical Cone of R0.1mm with 30° angle
Indentor Height: 2.50 mm
Weight: 208 g
Application / Materials: Hard rubber (High hardness)
Conform Standards: JIS K 6253, ISO 7619, ISO 868, ASTM D 2240
Type D(Peak Pointer Type)

 

Fig: TECLOCK GSD-720K digital durometer Type D at Semiki's warehouse

 

Peak Pointer Type :

Some of Rubbers, Elastomer' elastic body is not easy to read the maximum value after firm contacting with a presser foot of durometer , due to the stress relaxation.

The pointer indicates the descendent value but the peak pointer is holding the maximum measured value.

The peak pointer type can easily read the maximum value efficiently.

In case the pointer cannot be read directly due to some obstacles altough the measuring can be done, the mesured value can be confirmed from peak pointer after measuring.

The upper / lower limiters equipment will be effectively used in tolerance judgment.

Specifications:

Maintenance and calibration : 

► We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store.

Local Vietnam : SEMIKI Ins

 

DISTRIBUTED BY:

Semiki instrumentation Co., Ltd

Email: sales@semiki.com

Office tel: +84 28 2253 3522

~DOING OUR BEST FOR YOU~

Request a quote
SEMIKI MEASUREMENT EQUIPMENT COMPANY LIMITED
Headquarters:
  • Floor 12 – Tower A2, Viettel Building, 285 Cach Mang Thang Tam, Ward 12, District 10, Ho Chi Minh City, Vietnam
  • Sales@semiki.com
  • +84 979761016
  • Tax code 0313928935
Warranty, maintenance and repair center:
  • 10th Floor, Halo Building, 19-19/2A Ho Van Hue, Ward 9, Phu Nhuan District, HCMC
Representative office in Hanoi:
  • 9th Floor, 3D Building, No. 3 Duy Tan Street, Dich Vong Hau Ward, Cau Giay District, Hanoi City
© 2024 Semiki inc. All rights reserved.

Ask SEMIKI for a quote

Complete the form below to receive a quote from SEMIKI.
You need to enter all information fields below.