Force and mechanical measuring equipment
TECLOCK ZY-119, ZY-120
Probe length gauge
The probe height (contact point) of the hardness tester only needs to be checked. ZY-119 is for JIS K 6301 and ZY-120 is for JIS K 6253. Products of other manufacturers can be checked.
Rubber piece for measuring hardness
This is not a rubber test piece. Used for easy testing to find out the durometer fault. Measure the hardness when purchasing and use for daily durometer control.
Durometer is a testing machine. In case that it corresponds to “Monitoring Machine ” and “Measuring Machine” of ISO 9001 (JIS G 9001), controlling machines along with it is needed. Teclock is one of a few manufacturers of durometer which has obtained the authentication of ISO9001 and can originally issue 3 kinds of traceability system diagram, calibration certificate and inspection report that are needed for calibration documents. In addition, Teclock can issue 3 kinds of documents for durometer tester and indenter height gauge, that are needed for internal inspection. Use these for control based on internal calibration standard.
This is not rubber test piece. It is used for easy checking to find out failure of durometer. Measuring hardness when it is purchased and use it for daily control of durometer.
Code No. | Type | Dimension (mm) | Applicable Durometer |
ZY-107 | Durometer A
Hardness: 50 |
40 x 80 x 12 Thickness | Type A (GS, GSD-719J Series) |
ZY-108 | Durometer A
Hardness: 80 |
40 x 80 x 12 Thickness | |
ZY-109 | Durometer D
Hardness: 40 |
70 x 80 x 7 Thickness | Type D (GS, GSD-720J Series) |
ZY-110 | Durometer E
Hardness: 80 |
40 x 80 x 12 Thickness | Type E (GS, GSD-721J Series) |