Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

EQUIPMENT Flexible endoscope OLYMPUS IF SERIES

Producer: EVIDENT OLYMPUS

Category: Endoscopy equipment

Standard flexible endoscope with superior visibility
Flexible endoscopes allow remote visual inspection of areas with many bends or at depths that rigid endoscopes cannot reach.
Manufacturing an Olympus flexible endoscope is a unique process that requires a combination of high-end optical technology and advanced mechanics, which results in high-performance and high-quality products. The standard flexible endoscope always achieves the best image quality at 6.0 mm, 8.4 mm and 11.3 mm diameters with a length of 3 m. All models have the ability to rotate the endoscope head in 4 directions and replace the optical probe.

Diameter of endoscope		φ6.0mm	φ8.4mm	φ11.3mm
Length of endoscope	800mm	IF6C5X1-8
	1,000mm		IF8C5-10	IF11C5-10
	1,300mm	IF6C5X1-13
	1,500mm		IF8C5-15
	2,000mm	IF6C5X1-20	IF8C5-20
	3,000mm	IF6C5X1-30	IF8C5-30	IF11C5-30
Length of endoscope hardware		13.7mm	21.9mm	25.5mm
Open viewing angle		Depends on the optical head used.
Viewpoint		Straight / Edge (Depending on the optical head used)
Field of View (Focal Length)		Depends on the optical head used
Lighting systems		Use external light source
Rotating end of the probe	Camera angle	Up-Down 120°, Right-Left 100°
Length of light guide wire from light source to endoscope system		2,000mm

TECHNICAL SPECIFICATIONS OF CORRESPONDING OPTICAL HEADS

Endoscopy system	Optical head		Viewing angle	Viewpoint	Observation range
IF6C5X1	Included with the machine	AT60D/FF-IF6C5	60°	Straight	11 – ∞mm
	Option	AT30D-IF6C5	30°	Straight	26 – 372mm
		AT60D/NF-IF6C5	60°		5 – 102mm
		AT100D-IF6C5	100°		4 – ∞mm
		AT30S-IF6C5	30°	Edge	21 – 138mm
		AT60S-NF-IF6C5	60°		4 – 85mm
		AT60S/FF-IF6C5	60°		9 – ∞mm
		AT100S-IF6C5	100°		4 – ∞mm
IF8C5	Included with the machine	AT60D/FF-IF8C5	60°	Straight	20 – ∞mm
	Option	AT30D/NF-IF8C5	30°	Straight	30 – 70mm
		AT30D/FF-IF8C5	30°		60 – 250mm
		AT60D/NF-IF8C5	60°		9 – 50mm
		AT100D/NF-IF8C5	100°		3 – 200mm
		AT100D/FF-IF8C5	100°		9 – ∞mm
		AT30S-IF8C5	30°	Edge	45 – 90mm
		AT60S/NF-IF8C5	60°		8 – 40mm
		AT60S/FF-IF8C5	60°		20 – 240mm
		AT100S/NF-IF8C5	100°		3 – 140mm
		AT100S/FF-IF8C5	100°		9 – 200mm
IF11C5	Included with the machine	AT60D/FF-IF11C5	60°	Straight	27 – 390mm
	Option	AT30D/NF-IF11C5	30°	Straight	38 – 70mm
		AT30D/FF-IF11C5	30°		65 – 120mm
		AT60D/NF-IF11C5	60°		11 – 45mm
		AT100D/NF-IF11C5	100°		5 – 70mm
		AT100D/FF-IF11C5	100°		16 – 300mm
		AT30S-IF11C5	30°	Edge	55 – 100mm
		AT60S/NF-IF11C5	60°		11 – 40mm
		AT60S/FF-IF11C5	60°		28 – 440mm
		AT100S/NF-IF11C5	100°		3 – 22mm
		AT100S/FF-IF11C5	100°		12 – 250mm

OPERATING ENVIRONMENTAL CONDITIONS

			IF6C5X1	IF8C5	IF11C5
Ambient temperature	endoscope	In the air	-10 – 80°C (14 – 176°F)
		Underwater	10 – 30℃ (75 – 86°F)
	The rest	In the air	-10 – 50℃ (14 – 122°F)
Atmospheric pressure	endoscope	In air/water	1013 – 1317hPa
	The rest	In the air	1013hPa
Chemical resistance (machine oil, light oil and salt water 5%)			X	X	X
Waterproof	endoscope		X	X	X
Water resistant	Controller

Replaceable optical head

Although the focal point of each optical system is fixed, each inspection task requires different requirements for clear field of view and direction of observation. For this reason, all Olympus standard flexible endoscopes have the ability to replace the optical head, allowing the user to choose the appropriate field of view and direction of observation. In addition, a diode lens compensates for the different visual acuity of each inspector.

Image size

The image size of the flexible endoscope is larger than most other flexible endoscopes. Thanks to the good quality of the optical components, the image obtained from the Olympus flexible endoscope can be magnified and stored at high resolution.

TF tube with superior penetration ability

Most Olympus flexible endoscopes have an endoscope tube made of TF (Tapered Flex) which gives the tube the necessary flexibility at the body and tip, and strength at the handle, allowing the endoscope to enter and pass through many bends in the tube. At the same time, the gradual increase in stiffness of the tube as it approaches the handle ensures that the tube can be easily inserted into the inspection area or twisted when passing through the first bend. All endoscope systems using TF tubes have the logo marked on the body.

Rotate the endoscope head in 4 directions

All early models have the ability to rotate the probe head in 4 directions, allowing the user to steer the probe head to the position that needs to be inspected and observed.

Photography and filming

Users can take pictures and record videos by using an additional CCD imager or Olympus digital camera to combine with the device.

Waterproof endoscope

The entire endoscope can operate underwater. (Most models) The handle can withstand rain.

Endoscope with 4 sheaths

The structure of the endoscope is of particular concern when designing because this is the part that will go deep into the inspection area, so it must be sturdy and durable, but still ensure the necessary flexibility. To meet this requirement, Olympus has been very successful in designing a shell with 4 layers to protect the optical structures inside.