Force and mechanical measuring equipment
Cedar Digital Torque Screwdriver For final tightening and testing of screws & bolts, Lightweight and compact with built-in display!
Wireless type and improved operability. Allows stable measurement for long-term continuous use.
A screw tightening counter function is also installed as standard.
Allows saving of 5 channels of pass/fail criteria and allows easy setting changes by switching channels even when the tightening deadline changes.
Cedar Japan
Digital torque driver
model:
DID-4 ( 0.02 to 4 Nm)
DID-05 ( 2.0 to 500 mN.m)
Feature :
• The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed
• Peak, Real Time and Peak Down measuring mode (selectable)
• 800 data memory
• Programmable High and Low set points with both audible beep and Green/Red LED indicator for
uniform torque tightening or GO/NO GO testing
• Programmable screw tightening counter
• Programmable Auto Zero function resets unit to zero for easy operation
• Both CW and CCW operate
• ASCII format output (USB)
• Runs on internal NiMH batteries (for 12 hours) Auto shut-off after 10 min. of non-use.
Video: Digital torque screwdriver DID-4 / intro ( Vietnamese)
Picture: Cedar digital torque Srewdriver DID-4 ( 0.02Nm to 4 Nm / 0.2 kgf.cm to 40 kgf.cm ) at Semiki's warehouse.
Picture: Cedar digital torque Srewdriver DID-05 ( 0.02 kgf.cm to 5 kgf.cm) at Semiki's warehouse.
Maintenance and calibration :
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store.
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~