Force and mechanical measuring equipment
TOHNICHI Japan
DIGITAL TORQUE FLAG UP
Model: CEM50N3X12D-G-BTA
Digital Torque Wrench with Bluetooth & Torque and Angle
CEM50N3X12D-G-BTA Data Wrench, Digital Torque and Angle Wrench with Bluetooth,
Range: 10-50, 0.05N.m, 100-500, 0.5kgf.cm
0-999 degrees, 1 degree, 3/8″ square drive
All functions of -BTS, -BTD models plus Angle can be turned on/off
Features:
– Digital torque wrench with force and angle monitoring function
– Angle monitoring at maximum tightening torque or measured torque value
– Torque and angle judgment function
– Torque values and angle data are transmitted via Bluetooth
– Wireless full duplex communication sends Hi/Lo limit torque and angle settings to the wrench then sends the collected data back to the PC
– Basic functions of the CEM3-G Model with additional features of Corner Detection and Bluetooth communication
Digital Torque Wrench with Bluetooth & Torque and Angle
Features:
– Digital Torque Wrench with Torque & Angle Monitoring
– Angle monitoring at the peak tightening torque or measured torque value
– Judgment function by Torque and Angle
– Torque Value and Angle Data are transferred by Bluetooth
– Wireless duplex communication sends Hi/Lo limit torque and angle settings to the wrench then sends the collected data back to PC
– Basic functions of CEM3-G Model with additional features of Angle detection and Bluetooth communications
Digital Torque Wrench with Bluetooth & Torque and Angle
CEM50N3X12D-G-BTA Data Tork, Digital Torque and Angle Wrench with Bluetooth,
Range: 10-50, 0.05Nm, 100-500, 0.5kgf.cm
0-999 degrees, 1 degree, 3/8″ Square Drive
All functions of -BTS, -BTD models plus Angle that can be turned On/Off
Picture: TOHNICHI Digital Torque Wrench CEM50N3X12D-G-BTA ( 10~50[N・m]) at Semiki's warehouse
Standard Accessories: Battery pack (BP-5), QH head, Quick battery charger (BC-3-G)
Note:
– Trigger torque can be set between 5% of the maximum torque and up to the maximum.
– Trigger torque set below the minimum torque range of the model is not guaranteed.
– Applicable for use with Tohnichi Software: TDMS Tightening Data Managment in Measurment Mode. Ask about custom software to fit your specific needs.
Maintenance and calibration :
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store.
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~