Force and mechanical measuring equipment
The Yokogawa Process Multimeter CA450 is a portable tester that combines a digital RMS multimeter and a loop calibrator, allowing process technicians to efficiently perform their tasks with a single tool. The Yokogawa CA450 provides 24 Volt loop power, eliminating the need to carry a separate power supply when performing transmitter testing. And with a built-in selectable 250 Ohm Hart resistor, the device also eliminates the need for a separate resistor.
Loop power and 4 to 20 mA output function in DMM
From daily inspection to troubleshooting of measuring devices—all in one single unit!
Loop check function
Simultaneous 24 V loop power and mA measurement
Set HART mode with loop power (250 OHM resistor)
Create function
The SIMULATE (SINK) function simulates generators.
4-20 mA scan/step/auto-step/distance output
Measurement function
High precision signal measurement: DC mA 0.05%/30,000 mA
Handheld DMM function
Peak/Hold function for measuring DCS power from peak to peak
Dedicated sensor modes for direct reading of various sensor signals
The Yokogawa Process Multimeter CA450 is a portable test instrument that combines a digital RMS multimeter and a loop calibrator, allowing process technicians to efficiently perform their tasks using a single tool.
The Yokogawa CA450 provides 24-Volt loop power, reducing the need for carrying a separate power supply when performing transmitter testing. And with its built-in, selectable 250-Ohm Hart resistor, it also eliminates the need for a separate resistor.
Technicians involved in industrial process maintenance must troubleshoot a variety of instrumentation in the field. This requires carrying a wide variety of tools and electrical equipment such as digital multimeters and calibrators/sorucing devices. Individual, single purpose devices may not have the varied functionality needed for equipment validation, in addition to being cumbersome and inefficient to carry. In these situations, a device that can source, measure, and has PC compatibility would be the perfect instrument for the task. The CA450 Process Calibrator is defined by:
Pic.: Yokogawa Process Multimeter CA450 at Semiki's warehouse
Maintenance and calibration :
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store.
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~