Kanon calipers, for which the tradition of Kanon and it’s excellent technology are fully used from standard products and special products,
are commonly acknowledged first-class products concerning quality and precision
Bestool-Kanon Venier Calipers
Model: E-RM-J, E-RZ, RM-DX Series
E-RM-J Series Measure for distance between center to center of holes :
By setting the upper side offset value (15.00 mm) and the lower offset value (7.50 mm),
this instrument allows the measured center distance to be indicated as actual size.
This saves time for addition or subtraction of indicated value that is required by former instruments, resulting easier use.
Picture : Kanon E-RM-15J ( 0~150mm ) Centerline caliper for distance between center to center of holes with equal diameter at Semiki’s warehouse.
E-RX Series For measuring circular center distance of holes
The center distance of holes can be measured through direct reading.
Holes with a diameter of 20 mm at the maximum can be measured.
The printer output function is provided.
E-RZ For measurement of distance “between edge face and hole”
The distance between edge face and hole can be measured through direct reading.
Holes with a diameter of 20 mm at the maximum can be measured.
The printer output function is provided
E-RM60B: Adequate for center distance measurement for holes with equal diameter on long work
● Long vernier caliper that allows measurement of center distance of two holes with an equal diameter and measurement of distance between edge face and hole center.
● A special-purpose gage block is provided.
● The printer output function is provided.
接触 ：
Semiki Corp の精密測定の専門家に連絡するには、さまざまな方法があります。
このページの連絡先情報をご利用ください。 www.semiki.com 私たちに連絡するため。
セミキ計装株式会社
電子メール: sales@semiki.com
住所 : 63 Ho Ba Kien St.、15 Ward、Dist.10、HCMC、VN
～あなたのために最善を尽くします～
