Cảm biến gia tốc tích hợp bộ tiền khuếch đại ACO

Nhà sản xuất:

Danh mục: Cảm biến đo độ rung, Hệ thống phân tích độ rung, Máy đo độ rung, Máy đo độ rung động cơ Thẻ: Thiết bị đo độ rung

Cảm biến gia tốc là cảm biến phát hiện gia tốc hoặc độ rung bằng cách gắn hoặc tiếp xúc với thân máy móc, thiết bị đang rung. TYPE 7803A , NI USB-9234, 9234 NI, NI USB-9162, NI USB-9234

Công ty TNHH ACO cung cấp nhiều loại cảm biến gia tốc, bao gồm TYPE 7302 chỉ nặng bằng 1/5 đồng xu 1 Yên (0,2g) và các loại khác có dải nhiệt độ từ -50oC đến +160oC, đáp ứng nhiều nhu cầu khác nhau bởi khách hàng. Với cảm biến gia tốc tốc loại tiền khuếch đại tích hợp, bộ khuếch đại riêng đắt tiền là không cần thiết và có thể mở rông bằng cáp nối có độ nhiễu thấp, do đó giảm chi phí đo lường.

Piezoeletric Type Acceleration Pickup Built-in Preamplifier Type Acceleration Pickup

CASE STUDY

In general, acceleration pickup has a main axis with which the acceleration sensitivity becomes its maximum. It is called “Sensing Axis” and align this axis with the desired measurement direction. Normally the sensing axis is close to perpendicular to the mounting base surface of the pickup.
With the pickup fixed to the vibration table and if it is vibrated in the direction of sensing axis, the pickup will provide rating output. Next, if the pickup is mounted on the vibration table with inclination angle θ for the sensing axis and vibrated, the output (SVθ) will be rating output multiplied by cosθ,　Output for the sensing axis will be SVθ*cosθ. If the θ is brought to 90 degrees, the output is supposed to become zero however, because of the existence of the Transverse Sensitivity (i.e. Sensitivity in any given direction perpendicular to the sensing axis), there will be some output. In the case of pickups offered by ACO, the lateral axis sensitivity is less than 5%.

Triple axis pickup is very useful since it can measure the vibration in 3 axis simultaneously. It is a convenient sensor to obtain composition of acceleration in 3 axes, or to measure and evaluate human body exposure to the vibration of machinery.
New product, 3 axis 10 mm X 10 mm, was developed in reply to the need to use the pickup at measurement site where only small mounting space is available. It contains preamplifier yet it

[New On Sale] Small size 3 axis 10mm X 10mm Cubic Acceleration Sensor

3 axis Acceleration Sensor with Built-in Preamplifier

3 axis pickup Sensor with Microphone

Specification

Type	TYPE 7803A
Feature	Small size, 3 axis
Configuration	Shear type
Sensitivity mV/m/s²	1.0
Frequency Range Hz(±5%)	X、Y:2～10,000 Z:2～15,000
Frequency Range Hz(±3dB)	X、Y:0.5～15,000 Z:0.5～20,000
Resonant Frequency kHz	55
Maximum Usable Acceleration m/s²	5,000
Maximum Transverse Sensitivity %	5
Impact Resistance m/s²	30,000
Operating Temperature ℃	-50～+120
Power Source VDC	21～30
Current Consumption mA	2.0～10.0
Output Impedance Ω	100
Connector	CZ664
Cable	BC-0061
Case Material	Titanium
Outline size mm	10(W)x10(D)x10(H)
Weight g	4.4
Spanner Screw	M3 Female screw

Block chart

A/D Converter　NI USB-9234
A/D converter NI USB-9234 is composed of 9234 NI module and NI USB-9162 carrier. NI USB-9234 is a 4 channel A/D converter corresponding to the IEPE with USB bus power supply and it is convenient for carrying around.

Mount Base for small size 3 axis Pickup
Mounting base designed specifically for small size 3 axis pickup. It is a disposable type that enables easy and accurate mounting of the pickup.