Cảm biến gia tốc ACO – TYPE 7302, 7303, 7304, 7344A, 7351A, 7350A, 7323A, 7323B

Nhà sản xuất:

Danh mục: Cảm biến đo độ rung, Hệ thống phân tích độ rung, Máy đo độ rung, Máy đo độ rung động cơ Từ khóa: cảm biến gia tốc, Thiết bị đo độ rung

Bộ cảm biến gia tốc là một thiết bị để phát hiện gia tốc hoặc rung động bằng cách gắn hoặc tiếp xúc vào thân rung của máy móc hoặc thiết bị.

Công ty ACO Co., Ltd. cung cấp nhiều loại bộ cảm biến gia tốc, bao gồm cả TYPE 7302 chỉ nặng bằng 1/5 của đồng xu 1 Yên (0,2g), và các loại khác có phạm vi nhiệt độ từ -50℃ đến +160℃, đáp ứng các nhu cầu khác nhau của khách hàng. Với loại bộ cảm biến gia tốc tích hợp bộ khuếch đại tiền khuếch đại, không cần bộ khuếch đại điện tích đắt tiền và có thể kéo dài cáp nhiễu thấp, do đó giảm chi phí đo lường.

Piezoeletric Type Acceleration Pickup Built-in Preamplifier Type Acceleration Pickup

CASE STUDY

In general, acceleration pickup has a main axis with which the acceleration sensitivity becomes its maximum. It is called “Sensing Axis” and align this axis with the desired measurement direction. Normally the sensing axis is close to perpendicular to the mounting base surface of the pickup.
With the pickup fixed to the vibration table and if it is vibrated in the direction of sensing axis, the pickup will provide rating output. Next, if the pickup is mounted on the vibration table with inclination angle θ for the sensing axis and vibrated, the output (SVθ) will be rating output multiplied by cosθ,　Output for the sensing axis will be SVθ*cosθ. If the θ is brought to 90 degrees, the output is supposed to become zero however, because of the existence of the Transverse Sensitivity (i.e. Sensitivity in any given direction perpendicular to the sensing axis), there will be some output. In the case of pickups offered by ACO, the lateral axis sensitivity is less than 5%.

Triple axis pickup is very useful since it can measure the vibration in 3 axis simultaneously. It is a convenient sensor to obtain composition of acceleration in 3 axes, or to measure and evaluate human body exposure to the vibration of machinery.
New product, 3 axis 10 mm X 10 mm, was developed in reply to the need to use the pickup at measurement site where only small mounting space is available. It contains preamplifier yet it

Charge Output Acceleration Pickup_1

Type	TYPE 7302	TYPE 7303	TYPE 7304		TYPE 7344A
Appearance * Click the figure to see enlarged drawing.
Feature	Extremely small size	Small size, waterproof	Small ring		Small size, light weight
Configuration	Shear type	Bending type	Shear type
Sensitivity pC/m/s²	0.035	1.84	0.2		0.3
Frequency Range Hz(±5%)	fc ～ 6,000	fc ～ 1,300	fc ～ 10,000		fc ～ 15,000
Frequency Range Hz(±3dB)	fc ～ 20,000	fc ～ 2,000	fc ～ 20,000
Resonant Frequency kHz	60	5	60
Maximum Usable Acceleration m/s²	100,000	5,000			50,000
Maximum Transverse Sensitivity %	－	5
Impact Resistance m/s²	100,000	10,000			100,000
Operating Temperature ℃	-50 ～ +160	-20 ～ +120	-50 ～ +160		-20 ～ +150
Connector	N/A(cable)			Micro connector on the side surface(M3)
Cable	－			BC-0065
Case Material	Titanium	Stainless steel			Titanium
Outline size (excluding connector) mm	Φ3.5×2.5(H)	4(W)×13(D)×4(H)	Φ8×5.4(H)		7(Hex)×10.5(H)
Weight g	0.2	1.3	1.9		2
Spanner Screw	Bonding			Screw (M2) or Bonding		M3 Female screw
Appearance diagram mm * Click the figure to see enlarged drawing.

Charge Output Acceleration Pickup_2

Type	TYPE 7351A	TYPE 7350A	TYPE 7323A	TYPE 7323B
Appearance * Click the figure to see enlarged drawing.
Feature	For general applications		Extremely small size, 3 axis	Small size, 3 axis
Configuration	Compression type		Shear type
Sensitivity pC/m/s²	5.0		0.04	0.16
Frequency Range Hz(±5%)	fc ～ 8,000	fc ～ 7,000	fc ～ 5,000	fc ～ 10,000
Frequency Range Hz(±3dB)	fc ～ 12,000	fc ～ 10,000	fc ～ 20,000	fc ～ 15,000
Resonant Frequency kHz	40	30	60	40
Maximum Usable Acceleration m/s²	16,000		25,000	10,000
Maximum Transverse Sensitivity %	5
Impact Resistance m/s²	20,000		50,000	100,000
Operating Temperature ℃	-40 ～ +150		-50 ～ +160	-20 ～ +160
Connector	Miniature connector on the upper surface	Miniature connector on the side surface	N/A(cable)	Micro connector on the side surface(M3)
Cable	BC-0062		－	BC-0065
Case Material	Stainless steel		Titanium
Outline size (excluding connector) mm	14(Hex)×25(H)	14(Hex)×30(H)	8(W)×7(D)×5.5(H)	17(W)×9(D)×7(H)
Weight g	25	29	1.2	5.2
Spanner Screw	M6 Female screw		Bonding
Appearance diagram mm * Click the figure to see enlarged drawing.