Chân đế điện tử dùng cho máy đo lực AIKOH 1308U

Nhà sản xuất: AIKOH Engineering

Danh mục: Chân đế đo lực, Hệ thống máy đo lực Thẻ: AIKOH 1308U

AIKOH 1308U Digital stand Achieves high repeatability with constant testing speed and position . Easy digital setting of testing modes and speed. Offers useful functions operated together with force gauge.Selectable options available to meet your measurement requirements.A long-stroke automatic test stand dedicated to RZE Series & SX Series. This is a reasonable test stand that is suitable for tests of specimens of large size and long test stroke

AIKOH Engineering

A long-stroke automatic test stand

Model: 1308U

AIKOH Engineering Model: 1308U A long-stroke automatic test stand dedicated to RZE Series & SX Series.

This is a reasonable test stand that is suitable for tests of specimens of large size and long test stroke.

When used together with RZE Series or SX Series, such operations are possible as overload monitoring and automatic stop and reversing when the load set in RZE Series or SX Series is reached. For combining this stand with RZE Series or SX Series, please use an optionally available RZE-OP-1/RZE-OP-2 for RZ Series or SX-OP-1 for SX Series

Capable of handling forces up to 1 kN.

Stroke as large as 400 mm.

– Achieves high repeatability with constant testing speed and position
– Easy digital setting of testing modes and speed
– Offers useful functions operated together with force gauge
– Selectable options available to meet your measurement requirements

Caution:

• This product is designed for force measurement only. Do not use it for other purpose.

• Please pay close attention to install this products.

• Never apply strong force or impact especially on the sensing direction.

• Do not apply bending or torsion stress when setting up the sensing shaft to a measuring object.

• Do not use in the condition of rapid temperature changes, high temperature, high humidity, near water and dusty place.

• The contents may be changed without notice in advance.

• Please note the allowable values are a little different by the selecting unit of the amplifier.

Please contact SEMIKI if you need the details

Maintenance and calibration :

► We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP