HOTLINE: +84 979761016
ATTONIC VERICAL TYPE KS-501H ( manual type) adn KS-501E (Motorized type ) Load measurement stand that narrows function, and made to low price slimming
ATTONIC LOAD STAND VERTICAL TYPE
Model:
KS-501H ( Manual vertical type)
KS-501E ( Motorized vertical type)
Load measurement stand that narrows function, and made to low price slimming
Combining acceptable model
・Push-pull tester:
AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）
KS-501H(manual vertical load measurement stand):
The load measuring instrument is installed by a vertical desk-top manual operation type, and it uses it for compression and the forced duction test.
– The installation board where the load measuring instrument was installed moves up and down.
– The permissible capacity at rated load center distance is 500N(about 50kgf).
– The width of the main body is 200mm×250mm in depth ×455mm in height.
– Weight is half 9kg compared with our standard load measurement stand “K-501H”.
– The lineup to externals 10kN (about 1t) types that can correspond from the resin molding goods to the inspection of metal products is being examined.
KS-501E(electric vertical load measuring stand)
– The load measuring instrument is installed by a vertical desk-top electric operation type, and it uses it for compression and the forced duction test.
– The installation board where the load measuring instrument was installed moves up and down.
– The permissible capacity at rated load center distance is 500N(about 50kgf).
– The width of the main body is 200mm×300mm in depth ×530mm in height.
– Weight is half 13kg compared with our standard load measurement stand “K-501E”.
SPECIFICATIONS:
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~
Hệ thống máy đo lực
Hệ thống máy đo lực
Hệ thống máy đo lực
Hệ thống máy đo lực
Hệ thống máy đo lực
Hệ thống máy đo lực
Hệ thống máy đo lực
Hệ thống máy đo lực