HOTLINE: +84 979761016
Chroma 12061 6½ Digital Multimeter has assorted settings for resolution, integration time and ranges that allow users to optimize the configuration of measurement speed, resolution and accuracy when in individual measurement test modes. The 12061 has built-in a high speed, low interference A/D converter with a maximum speed of 2000 rdgs/s, making it the best solution for high speed measurement.
| Model | Description |
| 12061 | 6½ Digital Multimeter |
| Accessories | |
| 9562 | SoftPanels |
| 10232 | Rack Mount kit |
| A120000 | Multi-point Scanner Card 10 channel |
| A120001 | Thermal-Measurement Adapter |
| A120002 | Multi-point Scanner Card (20ch) |
| A120003 | HV Probe (1000:1) |
| A120004 |
Multi-point TC Scanner card (10CH) |
Chroma 12061 TOOL and Chroma 12061 LINK are two free softpanels included with
the 12061 which provide data collection and drawing for analysis.
Chroma’s 12061 is equipped with 11 types of measurement functions including DC voltage/current, AC voltage/current, resistance 2/4-wire ohms, period, frequency, diode, continuity, and temperature as well as a diverse set of math functions like NULL, Max/Min/Avg, High/Low limit, Percentage/Ratio/MX+B, dB/dBm, etc. Along with trigger and memory function, the Chroma 12061 is the right tool for performing basic measurements.
For convenience, Chroma supports various software and hardware for different control platforms.
Chroma 12061 TOOL: This is a real-time display interface for value monitoring. It can log and output data in CSV format for analysis.
Chroma 12061 LINK: This can send the data to a PC in real time directly and save it to EXCEL or WORD format file as well as create the data pattern.
Test engineers can use ActiveX components to control the 12061 using SCPI commands.
Different from the traditional interface, the Chroma 12061 uses USB as its standard communication interface, this not only improves the transmission speed but also makes connection easier with plug and play functionality.
The USB interface fully supports USBTMC (USB Test & Measurement Class). As long as the instrument is equipped with a USB interface that supports USBTMC, it can communicate with a PC in real time via VISA driver without the restrictions of platform and environment. USBTMC is a communications protocol built on top of the USB standard and uses GPIB-like methodology to communicate through USB. Therefore, from user’s point of view, using USB is as simple as using GPIB.
Chroma 12061 can provide PASS/FAIL signal to system by USB port (either communication or PASS/FAIL signal) with high/low limit set. Use a USB type B female connected to system with signal (1 floating/ 2 PSS/ 3 FAIL/ 4 GND) in 2ms low and USB interface disabled on the meter. If the result is over the high/low limit, the beeper will alarm and the signal output. (Beeper can be off)
Chroma 12061 has temperature measurement functions that support 7 kinds of Thermocouples: E, J, K, N, R, S, and T type. It also supports RTDs 4-wire measurements. The built-in ITS-90, IEC751 and Callendar-Van Dusen temperature conversion satisfies a diverse range of measurement requirements.
The Chroma 6½ Digital Multimeter supports a Multi-point Scanner Card, a scanning measurement tool not supported by most 6½ Digital Multimeters in the field.
The Multi-point Scanner Card offers multiplexing of ten two poles (ACV, ACI, DCV, DCI, Resistance, Period, Frequency) that can be installed on the extension card option directly off the rear panel.
Maintenance and calibration :
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~
Giải pháp đo SEMIKI
Giải pháp đo SEMIKI
Giải pháp đo SEMIKI
Giải pháp đo SEMIKI
Giải pháp đo SEMIKI
Giải pháp đo SEMIKI, Máy kiểm tra chức năng PCB
Giải pháp đo SEMIKI
Giải pháp đo SEMIKI