Logo Semiki
HOTLINE: +84 979761016
0

Giỏ hàng

Chưa có sản phẩm trong giỏ hàng.

Tiếp tục xem sản phẩm
Home / Cửa Hàng / Máy đo ngành điện tử / Thiết bị đo ESD / Máy đo điện trở bề mặt / DESCO 50005 đầu dò đồng tâm đo điện trở bề mặt 1 x 10^12 ohms
Danh mục sản phẩm

DESCO 50005 đầu dò đồng tâm đo điện trở bề mặt 1 x 10^12 ohms

Nhà sản xuất:

DESCO U.S.A 50005 – Concentric Ring Probe
Đầu dò vòng đồng tâm Desco 50005 là một thiết bị được sử dụng kết hợp với máy đo điện trở, chẳng hạn như Máy đo điện trở bề mặt kỹ thuật số Desco 19787, để đo điện trở bề mặt theo ANSI/ESD STM11.11, phương pháp thử nghiệm được liệt kê trong Tiêu chuẩn đóng gói ANSI/ESD S541 về điện trở bề mặt của vật liệu phẳng.
Đầu dò vòng đồng tâm (Tham chiếu: ANSI/ESD STM11.12) có thể đo điện trở thể tích của vật liệu phẳng bằng cách sử dụng tấm kim loại dẫn điện phẳng (không bao gồm).

DESCO U.S.A.

Concentric Ring Probe

Model: DESCO 50005

The Desco 50005 Concentric Ring Probe is an instrument to be used in conjunction with a resistance meter, such as the DESCO 19290 Digital Surface Resistance Meter, to measure surface resistance per ANSI/ESD STM11.11 the test method listed in Packaging standard ANSI/ESD S541 for surface resistance of planar materials.

The Concentric Ring Probe (Ref: ANSI/ESD STM11.12) can measure the volume resistance of planar materials using a flat conductive metal plate (not included).
The Concentric Ring Probe may be used for the resistance measurements of ESD packaging including static shielding and other bags.

Specification: 

Per ANSI/ESD STM11.11 section 12.0 “CONVERSION TO RESISTIVITY, When it is appropriate to convert a resistance obtained by this test method to an equivalent resistivity in ohms per square, multiply the resistance measurements obtained by this method by ten.
The conversion factor of ten is derived from the geometry of the electrode assembly.
NOTE: Conversions to resistivity may not be valid for materials that are laminated, plated or metallized with conductive materials.
This fact should be understood when users of this test procedure are required to satisfy specifications given in “ohms/square.”
Pic.: Desco 50005 Concentric Ring Probe at Semiki’s warehouse

Maintenance and calibration : 

► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store.

Local Vietnam : SEMIKI CORP

DISTRIBUTED BY:

Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
Office tel: +84 28 2253 3522

~DOING OUR BEST FOR YOU~

Yêu cầu báo giá
CÔNG TY TNHH THIẾT BỊ ĐO SEMIKI
Trụ sở chính:
  • Tầng 12 – tháp A2, Tòa nhà Viettel, 285 Cách Mạng Tháng Tám, Phường 12, Quận 10, Thành Phố Hồ Chí Minh, Việt Nam
  • Sales@semiki.com
  • +84 979761016
  • MST 0313928935
Trung tâm bảo hành, bảo trì và sửa chữa:
  • Lầu 10, Tòa nhà Halo, 19-19/2A Hồ Văn Huê, Phường 9, Quận Phú Nhuận, TP HCM
Văn phòng đại diện tại Hà nội:
  • Tầng 9 Tòa nhà 3D, Số 3 Phố Duy Tân, Phường Dịch Vọng Hậu, Quận Cầu Giấy, Thành phố Hà Nội
© 2024 Semiki inc. All rights reserved.

Yêu cầu SEMIKI báo giá

Hoàn thành biểu mẫu dưới đây để nhận báo giá từ SEMIKI.
Bạn cần nhập đủ tất cả các trường thông tin bên dưới.