HOTLINE: +84 979761016
TECLOCK Thermosetting Poly urethane Estolamer Moldings Physical Test GS-701N, GS-701G. Standard about physical test method of polyurethane Elastomer. One of the test items is hardness test and rubber
industry generally calls type A durometer “shore-A” and type D durometer “shore- D”. In addition, type C for low
hardness range is called ASKER and GS-701N(G) is the same product ASKER-C. It complies with hardness test of
JIS S 6050 “Plastic eraser ”. Furthermore, SRIS 0101 (ex Society of Rubber Industry, Japan standard of Measure)
which was the base of these standard was already discontinued, but only type name is remained.
TECLOCK Thermosetting Poly urethane Estolamer Moldings Physical Test.
Model : GS-701N / GS-701G.
Compliance with JIS K 7312 standard
Standard about physical test method of polyurethane Elastomer.
In addition, type C for low hardness range is called ASKER and GS-701N(G) is the same product ASKER-C.
It complies with hardness test of JIS S 6050 “Plastic eraser ”.
Furthermore, SRIS 0101 (ex Society of Rubber Industry, Japan standard of Measure) which was the base of these standard was already discontinued, but only type name is remained.
Pic.: TECLOCK GS-701N ( shore C) at Semiki’s warehouse
Picture: Teclock GS-701G ( Type C- Soft rubber, Foam rubber Eraser, Windings yarn/ Peak pointer type) at Semiki’s warehouse
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~
Đồng hồ đo độ cứng cao su
Đồng hồ đo độ cứng cao su
Đồng hồ đo độ cứng cao su
Đồng hồ đo độ cứng cao su
Đồng hồ đo độ cứng cao su
Đồng hồ đo độ cứng cao su
Đồng hồ đo độ cứng cao su, Máy đo độ cứng nhựa, cao su, Thiết bị đo độ cứng vật liệu
Đồng hồ đo độ cứng cao su