KYOWA WDS-190AS1E, WDS-191AS1E bộ hiển thị dữ liệu đo lực

Nhà sản xuất: KYOWA

Category: Cảm biến lực

Đồng hồ đo kỹ thuật số nhỏ gọn KYOWA-WDS-190AS1E- WDS-191AS1E (có chức năng ghi âm)
●Đèn nền cho phép sử dụng ngay cả ở những nơi tối.
●Hiển thị dữ liệu theo 5 chữ số, đơn vị, trạng thái và công suất thấp.
●Đo hiện tượng 2,5 Hz ở tốc độ lấy mẫu 50 Hz.
●WDS-191AS1E ghi dữ liệu theo định dạng CSV.
Cảm biến áp dụng: Bộ chuyển đổi đo ứng suất (điện trở đầu vào: 60 ohm đến 1000 ohm)
Phạm vi đo: ±5,0000 mV/V (±10000 μm/m)
Nguồn điện: Pin kiềm cỡ AA × 2

KYOWA ELECTRONIC INSTRUMENTS

Compact Digital Indicator

Model:
WDS-190AS1E
WDS-191AS1E (with recording functions)

The WDS-190AS1E/WDS-191AS1E is a compact and lightweight digital indicator specified for strain gage transducers.

The WDS-190AS1E/WDS-191AS1E indicates physical quantities, measures initial values (in “με” or “mV/V”) of transducers, and executes sensitivity registrations automatically by connecting TEDS- compatible transducers.

The WDS-190AS1E/WDS-191AS1E uses “με” as the “10-6 strain” and “μm/m.”

The WDS-191AS1E records data and saves CSV files in text format.
To read the CSV files, use commercially available software (Microsoft Excel).
The WDS-190AS1E/WDS-191AS1E is able to be used in wide application such as for checking transducers and simplified measurement.

FEATURES

Measures original values (in “με” or “mV/V”) of transducers.
Converts raw outputs into physical quantities based on the LOAD ADJ (actual loadcalibration)/ENROLMNT ADJ (sensitivity registering calibration).
Executes sensitivity registrations automatically and measures data immediately by connecting TEDS-compatible transducers
Records and saves data with commercially available software.
Light weight and small enough to put in chest pockets.
Operates up to 72 hours continuously with commercially available AA size alkali batteries

CONTROLS AND INDICATORS

SPECIFICATIONS

Applicable sensor: Strain gage transducer (input terminal resistance: 60 ohm to 1000 ohm)
Measuring range: ±5.0000 mV/V (±10000 μm/m)
Power supply: AA size alkali battery × 2