HOTLINE: +84 979761016
HIOS Automatic Screw Feeder HSIII Series corresponding to 8 types of screw diameters with one main unit by replacing rails.Fast and stable supply of screws. Equipped with a safety function that activates overload protection in the event of an abnormality such as screw clogging.
HIOS Japan
Automatic Screw Feeder
Model: HSIII Series
Corresponding to 8 types of screw diameters with one main unit by replacing rails.
Fast and stable supply of screws.
Equipped with a safety function that activates overload protection in the event of an abnormality such as screw clogging.
Corresponding to 8 types ( M1.0 to M3.0)
HSⅢ-10 (M1.0)/ HSⅢ-12 (M1.2)/ HSⅢ-14 (M1.4)/ HSⅢ-17 (M1.7)
HSⅢ-20 (M2.0)/ HSⅢ-23 (M2.3)/ HSⅢ-26 (M2.6)/ HSⅢ-30 (M3.0)
Quantity of screws thrown in
If too many screws are thrown in, orientation and transfer of the screws will be seriously affected. See the diagram on the right for the maximum number of the throw screws in the scooping chamber.
Screws should be positioned 2 to 3 mm below the rail groove.
Adjusting the height of the brushes
The brushes in the HSF should rotate at a height where they come in contact with the screw heads going into the rail groove. If adjustement is required, loosen the brush height adjustment screw.
Pic.: HIOS Automatic Screw Feeder HSIII-17C (M1.7/ ∅2.0~4.5mm) at Semiki’s warehouse
Maintenance and calibration :
► Please re-maintenace after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~
Thiết bị phòng sản xuất
Thiết bị phòng sản xuất
Thiết bị phòng sản xuất
Thiết bị đo từ tính Tesla/Gauss, Thiết bị phòng sản xuất
Thiết bị phòng sản xuất
Thiết bị đo từ tính Tesla/Gauss, Thiết bị phòng sản xuất
Thiết bị phòng sản xuất
Thiết bị phòng sản xuất