MÁY ĐO THÔNG SỐ LINH KIỆN LCR – EXTECH LCR200

Nhà sản xuất:

Danh mục: Thiết bị phân tích đặc tính điện

Extech LCR200: Passive Component LCR Meter.
Measures Inductance, Capacitance, and Resistance with secondary parameter (Q,D,R,P,ESR)
The LCR200 is a passive component LCR meter. Discover the tremendous value with a range of features that help this meter provide the precise measurements you need. See simultaneous 20,000/2,000 count display of the primary parameter on the high contrast backlit display. You can set Hi/Lo limits using absolute values or percentages. Open and Short Zero removes unwanted stray impedances from the measurement. Use the built-in test fixture or external test leads (included). The LCR200 has an Auto Power Off function that can also be disabled and a low battery indicator to alert you when to replace the batteries. Complete with test leads and 9V battery.

Extech Passive Component LCR Meter.

Model : LCR200

Measures Inductance, Capacitance, and Resistance with secondary parameter (Q,D,R,P,ESR)

The LCR200 is a passive component LCR meter. Discover the tremendous value with a range of features that help this meter provide the precise measurements you need.

See simultaneous 20,000/2,000 count display of the primary parameter on the high contrast backlit display.

You can set Hi/Lo limits using absolute values or percentages.

Open and Short Zero removes unwanted stray impedances from the measurement. Use the built-in test fixture or external test leads (included).

The LCR200 has an Auto Power Off function that can also be disabled and a low battery indicator to alert you when to replace the batteries. Complete with test leads and 9V battery.

picture:extech Passive Component LCR Meter LCR200 at Semiki’s warehouse

General Specifications:

Features:

* 19,999/1,999 count dual LCD display.
* Auto LCR smart check and measurement.
* Serial/Parallel modes are selectable.
* Ls/Lp/Cs/Cp with D/Q/RP/ESR parameters.
* DC Resistance.
* Five test frequencies are available: 100Hz/120Hz/1kHz/10kHz/100kHz.
* Test AC signal level : 600mV rms typically.
* Test range : ( ex. F = 1 KHz )
L : 0.00uH to 2000.0H
C : 0.0pF to 2.000 mF
R : 0.000Ω to 200.0 MΩ
* Multi-level battery detector.
* LCD with green backlight