Lead frame attachment machine | FI-930T type use |
---|---|
Lead frame standard size cut length | MAX 280mm |
An application lead frame size and a substrate size | W:65mm or less D:40mm or less L1:8~20mm L2:55mm or less T:0.6~8mm (It is clamper exchange when T is 9?13 mm.) A clamper is an option. |
The direction of a work flow | The left -> right |
Work conveyance | Belt conveyance -> mechanism zipper system |
Flux application | Dip system (sub tub up-and-down system) |
Preheating system | Far-infrared heater(0~200℃) |
Soldering system | Dip system (the solder sub tub up-and-down system by a pulse motor, a 0.1-mm step arbitrary setting good, and a display are liquid crystal display) |
Baton time | About 12 seconds (it contains for about 3 seconds solder immersion time) |
Dip system | An arbitrary setup in key operation is possible till 0 to 9.9 seconds. |
Solder surface dregs removal | Each time, it is based on a scraper. |
Solder icicle removal | It is based on a ceramic heater. |
Work recovery | it is based on an exclusive career — dropping |
Memory function | 50 kinds (they are an arbitrary setup and liquid crystal display by key operation, such as the amount of soldering up-and-down movements, immersion time, and up-and-down speed) |
Power supply | 200V (single phase), 50/60 Hz, 30A |
Common sky pressure | Dry air 5kg/cm2 Air pressure display (panel side) |
Outside dimension | L abbreviation 1,910 x W 985 x H 1,390mm |
Weight | About 250 kg |
Solder tub capacity | About 20 kg |
Painting color | ECG standard color (2.5V7.6/1.4 leather color) |
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store.
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~