HOTLINE: +84 979761016
SHIMADZU EDX-LE is an X-ray fluorescence spectrometer designed specifically for screening elements regulated by RoHS/ELV directives. The model uses a detector (Si-PIN semiconductor detector) that does not require liquid nitrogen, thereby achieving lower operation cost and easier maintenance. Automated analysis functions improve operability without sacrificing its high level of inspection reliability. The time required from start of measurement to judgment is as short as one minute for some samples, which is very helpful in screening inspections for elements regulated by the RoHS directive
EDX-LE is an X-ray fluorescence spectrometer designed specifically for screening elements regulated by RoHS/ELV directives.
The model uses a detector (Si-PIN semiconductor detector) that does not require liquid nitrogen, thereby achieving lower operation cost and easier maintenance.
Automated analysis functions improve operability without sacrificing its high level of inspection reliability.
The time required from start of measurement to judgment is as short as one minute for some samples, which is very helpful in screening inspections for elements regulated by the RoHS directive.
Easy, highly accurate screening
Start measurements just 15 minutes after turning on the power.
Measurement stops immediately after the target elements have been evaluated to save time, while ensuring highly sensitive and reliable analysis.
Simple single-point calibration curves are registered in the instrument to allow quantification without the need for standard samples.
The analysis of a plastic (PVC cable insulation) is shown below. The OK, NG, gray-zone evaluation with respect to the control values is easily obtained.
* The control values in the results below are set to the maximum permitted concentrations under the RoHS Directive.
RoHS, Halogen, Antimony Compatible EDX-LE Check Sample
Enables Antimony Screening in Addition to RoHS/ELV and Halogen Screening
No hardware modification or software installation required*
Simply exchange check sample
Allows measurement of all 7 elements including those specified by the RoHS directive, Halogen regulation and Antimony
(Cd, Pb, Hg, Cr, Br, Cl, and Sb) using the same analytical conditions
Picture: Shimadzu EDX-LE Energy dispersive X-ray Fluorescence spectrometer – full set
Video: Shimadzu Energy Dispersive X-Ray Fluorescence Spectrometer | intro |semiki.com
The EDX-LE is an instrument that facilitates analysis, management and output for restriction of hazardous substances (RoHS) screening, used in the identification of heavy metals such as cadmium, lead, chromium and mercury (Cd, Pb, Cr, Hg), halogens like bromine and chlorine (Br, Cl), as well as other potentially hazardous elements, such as antimony (Sb).
Handling of these analyses has become simplified, as they can now be conducted in an air atmosphere without the need for liquid nitrogen.
This opens up the applicability of such analyses to include quality management and acceptance as well as pre-shipment inspection in the manufacturing process.
As an example of some of these performance features, we present the measurement results of an aqueous standard solution of 18 elements, Al- Pb, under air atmospheric conditions, as well as their respective calculated lower limits of detection and repeatability
Maintenance and calibration :
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~
Máy đo màu, Thiết bị quang phổ, X-Ray
Máy đo và phân tích độ pH, Thiết bị phòng Lab
Máy đo nhiệt độ,độ ẩm, Thiết bị phòng Lab
Thiết bị phòng Lab
Thiết bị quang phổ, X-Ray
Thiết bị quang phổ, X-Ray
Máy đo độ dày vật liệu phi từ tính, Thiết bị phòng Lab
Thiết bị phòng Lab