máy kiểm tra nội trở pin, ắc quy Hioki 3561

Nhà sản xuất: HIOKI

Danh mục: Máy đo điện trở cách điện

Máy kiểm tra pin Hioki hỗ trợ đồng thời tốc độ đo điện trở và điện áp pin đồng thời cho các dây chuyền sản xuất pin lithium-ion ngày càng tăng, và các gói pin khác cho các ứng dụng điện áp cao. 3561 là thiết bị thử kháng nội bộ từ 300 mΩ đến 3Ω / 20V DC cho thử nghiệm dây chuyền sản xuất tốc độ cao của pin thứ cấp nhỏ.

HIOKI BATTERY HiTESTER

Model : 3561

Key Features :

• High-speed testing for production lines of small battery packs for mobile and portable communications devices

• Measure internal resistance and battery voltage

• For process control such as in high-speed automated assembly lines

Note: The comparison threshold values depend on the battery manufacturer, type, and capacity, and these must be established by the user

Specifications:

Max. applied measurement voltage	±22 V DC ±70 V DC maximum rated voltage above ground
Resistance measurement ranges	300 mΩ (Max. display 310.00 mΩ, resolution 10 μΩ) to 3 Ω (Max. display 3.1000 Ω, resolution 100 μΩ), 2 ranges Accuracy: ±0.5 % rdg. ±5 dgt. (Add ±3 dgt. for EX.FAST, or ±2 dgt. for FAST and MEDIUM) Testing source frequency: 1 kHz ±0.2 Hz, testing current: 10 mA (300 mΩ range), 1 mA (3 Ω range) Open-circut Voltage: 7 V peak
Voltage measurement ranges	DC 20 V, resolution 0.1 mV, Accuracy: ±0.01 % rdg. ±3 dgt. (Add ±3 dgt. for EX.FAST, or ±2 dgt. for FAST and MEDIUM)
Display	31000 full digits (resistance), 199999 full digits (voltage), LED
Sampling rate	Four steps, 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow) (Typ., sampling time depends on supply frequency settings and function.)
Measurement time	Response time + sampling rate, approx. 3 ms for measurements (Response time depends on reference values and the measurement object.)
Comparator functions	Judgment result: Hi/IN/Lo (resistance and voltage judged independently) Setting: Upper and lower limit, Deviation (%) from reference value Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results. Result display, beeper, or external I/O output, Open-collector (35 V, 50 mA DC max.)
Interfaces	External I/O, RS-232C, Printer (RS-232C), GP-IB (-01 suffix models only)
Power supply	100 to 240 V AC, 50/60 Hz, 30 VA max.
Dimensions and mass	215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz)
Accessories

Picture: Hioki battery hitester 3561 at Semiki’s warehouses

Options:

picture: HIOKI 9770 Pin test Lead for battery tester 3561 at Semiki’s warehouse

Maintenance and calibration :

► We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP