Mitutoyo 293-141-40 QuantuMike Panme điện tử đo ngoài (25 – 50mm )

Nhà sản xuất: MITUTOYO

Category: Dụng cụ đo chuẩn Tag: panme mitutoyo

Mitutoyo QuantuMike 293-141-40 (25 – 50mm/ 0,001 mm)
Giao hàng: Bao gồm hộp, cờ lê, pin CR2032, giấy chứng nhận kiểm định
Inch-Metric: Metric
Phạm vi: 25 – 50 mm
Bước kỹ thuật số: 0,001 mm
Lỗi tối đa cho phép
J MPE: ±1 µm
Độ phẳng: 0,3 µm
Độ song song: 1 µm
Đầu ra dữ liệu: Digimatic S1
Màn hình: LCD, chiều cao ký tự 7,5 mm
Mặt đo: Đầu cacbua, hoàn thiện dạng vi chồng
Trục đo: Có khóa trục, ø 6,35 mm, bước trục 2 mm
Lực đo: 7 – 12 N

MITUTOYO Japan

Digital Micrometer QuantuMike IP65
Model: :293-141-40 (25 – 50mm)

This is an IP65 micrometer offering movement four times as fast as a standard micrometer.

It presents you with the following benefits:

Faster measurement is achieved by using a coarser thread which feeds the spindle by 2 mm per thimble rotation.
Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible.
Ratched thimble mechanism and a small design ensures easy single-handed or stand operation.
Equipped with a calibration schedule warning function.
GO/±NG judgement is performed by setting the upper and lower tolerance limits.
Approach speed warning function for reliable measurements.
Extraordinary battery life of 2 years (4000 h).
Outstanding accuracy refer to EN ISO 3611 J_MPE ±1 µm (0-25, 25-50 mm model).
Excellent resistance against water and dust (IP65 protection level) enables this micrometer to be used in machining situations that include splashing coolant fluid.
A function lock protects the display against unauthorized use.
Visibility is improved by enlarging the display unit.

Mitutoyo QuantuMike Digital Micrometer

Digital Micrometer QuantuMike IP65

25-50mm, with Bidirectional Output

Digital/Analog: Digital
Delivered: Including box, spanner, CR2032 battery, certificate of inspection
Inch-Metric: Metric
Range: 25 – 50 mm
Digital step: 0.001 mm
Max.Permissible Error
J MPE: ±1 µm
Flatness: 0.3 µm
Parallelism: 1 µm
Data output: Digimatic S1
Display: LCD, character height 7.5 mm
Measuring face: Carbide-tipped, micro-lap finish
Measuring spindle: With spindle lock, ø 6.35 mm, spindle pitch 2 mm
Measuring force: 7 – 12 N