SATO pH Meter 6440-00 thiết bị đo PH cầm tay

Nhà sản xuất: SATO KEIRYOKI

Danh mục: Máy đo và phân tích độ pH Thẻ: máy đo pH cầm tay

SATO 6440-00 bao gồm thân máy SK-625PH và đầu đo pH PHP-31.SK-625PH là máy đo pH cầm tay phù hợp để theo dõi chất lượng nước sông và nước thải nhà máy, và quản lý trong các quy trình nông nghiệp, sản xuất bia và lên men.
Dải đo pH 0,00 đến 14,00 Nhiệt độ 0,0 đến 50,0°C
Máy có cảm biến có thể thay thế và chức năng giao tiếp thời gian tiếp theo thực hiện thông tin đầu ra RS-232C. Có thể đo liên tục khi kết nối bộ nguồn AC (tùy chọn)

SATO KEIRYOKI Japan

Handy Type pH Meter with Probe

Model : SK-625PH + PHP-31 ( No.6440-00)

SK-625PH is a portable pH meter suitable for quality monitoring of a river and a factory wastewater, and management in processes of agriculture, brewage, and fermentation.
It has a replaceable sensor and a real-time communication function via RS-232C output.
Nonstop measurement is available when an AC adapter sold separately is connected.

Feature

■ A variety of sensor probes applicable

■ Automatic temperature compensation available when PHP-31 sensor probe is attached

■ Three-point calibration available for a precise measurement

(pH 4.01 phthalate, pH 6.86 neutral phosphate, pH 10.01 carbonate)
* The pH above is under condition of 25°C.
* Calibration solutions included in the kit are only for test purposes. For accurate measurement it is recommended to purchase calibration solutions in addition.

■ Auto power-off when not in use for 20 minutes.

■ LCD backlight

■ Maximum and minimum values recordable

■ Endless measurement available with an AC adapter sold separately

■ Real-time communication and monitoring available with an RS-232C cable sold separately

SATO pH meter SK-625PH 3-point calibration in 2 minutes and 30 seconds.

Description

■ Caution

Calibration solutions are sold separately. For accurate measurement it is recommended to use calibration solutions.

■ Notice

– The sensor may be damaged to shorten its life if it is used for liquids such as organic solvents, oils, adhesives, surface-active agents, strong acids (pH 0 to 2), or strong alkalis (pH 12 to 14).
– The reading may become unstable if you measure pure or tap water.
– If you measure food or drink, take a sufficient quantity of a sample in a separate container so that the end of the sensor is immersed at least 3 cm in the sample. Do not eat or drink the sample after measurement.

– The sensor is made of glass, so take a great care in handling. Be careful not to injure yourself when it is broken.

■ Lineup of calibration solutions

Pic.: SATO pH meter SK-625PH with Standard probe PHP-31, calibration solutions (pH 4.01, 6.86, 10.01) 23 mL for each, carrying case, 9-volt battery x1, instruction manual