Logo Semiki
HOTLINE: +84 979761016
0

Giỏ hàng

Chưa có sản phẩm trong giỏ hàng.

Tiếp tục xem sản phẩm
Danh mục sản phẩm

thiết bị đo độ cứng ASKER DUROMETER TYPE A, B,C, D

Nhà sản xuất:

Asker Hardness testers feature portable design, ease of operation, non-destructive measurement and optional peak indicators. Supplied with 3 point NIST traceable calibration cert.
The Asker High Performance series has an accuracy of ±.75 point and is available in Type F for soft materials like sponge rubber and urethane foam.
Asker models are available in ASTM D 2240 durometer Types: Shore A Hardness, Shore D Hardness and Asker C Hardness durometer scales.

 

 

ASKER-A global brand born in Kyoto

[KOBUNSHI KEIKI CO., LTD.]

 

High Performance Durometer-Hardness tester

 

 

Common Hardness scales:

Shore A Normal rubber
Shore D Hard rubber & plastics
Asker C Soft rubber
Asker F Urethane foam, sponge and polystyrene foam

 

Special Hardness Scales

Asker JA Normal rubber & softer plastics
Asker B Semi rigid rubber & plastics
Asker C2 Soft rubber & sponge Asker
Asker CS Polystyrene foam
Asker E Soft & cellular rubber

 

 

• Asker Hardness testers feature portable design, ease of operation, non-destructive measurement and optional peak indicators. 

• Supplied with 3 point NIST traceable calibration cert.

• The Asker High Performance series has an accuracy of ±.75 point and is available in Type F for soft materials like sponge rubber and urethane foam.

• Asker models are available in ASTM D 2240 durometer Types: Shore A Hardness, Shore D Hardness and Asker C Hardness durometer scales.

 

 

 

Pic.: ASKER Durometer Type A general rubber (Normal hardness ) JIS K 6253-3, ASTM D 2240, ISO 48-4 at Semiki’s warehouse 

 

Hardness Tester Operation

As the hardness tester is pressed against the sample, the material resistance force and indentor spring load balance. The depth of the indentor is measured, which provides a measure of the material’s hardness. Values are based upon a 100 point scale (accuracy ±.75 point). However, as time elapses the indicator will “creep” back so that a reading taken a few seconds after the tester makes contact with the sample will be less than the peak reading. The optional peak indicator helps to more closely monitor the difference between peak and “creep” in hardness tests.

 

 

 

Pic.: ASKER Durometer Type C soft rubber, sponges, and other foam elastomers, as well as rolled-threads, -films and textile windings (yarn packages). at Semiki’s warehouse 

 

Maintenance and calibration : 

 

 We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP

 

 

 

 

DISTRIBUTED BY:

 

Semiki instrumentation Co., Ltd

Email:  sales@semiki.com

Office tel: +84 28 2253 3522

 

 

~DOING OUR BEST FOR YOU~

 

 

 

 

 

Yêu cầu báo giá
CÔNG TY TNHH THIẾT BỊ ĐO SEMIKI
Trụ sở chính:
  • Tầng 12 – tháp A2, Tòa nhà Viettel, 285 Cách Mạng Tháng Tám, Phường 12, Quận 10, Thành Phố Hồ Chí Minh, Việt Nam
  • Sales@semiki.com
  • +84 979761016
  • MST 0313928935
Trung tâm bảo hành, bảo trì và sửa chữa:
  • Lầu 10, Tòa nhà Halo, 19-19/2A Hồ Văn Huê, Phường 9, Quận Phú Nhuận, TP HCM
Văn phòng đại diện tại Hà nội:
  • Tầng 9 Tòa nhà 3D, Số 3 Phố Duy Tân, Phường Dịch Vọng Hậu, Quận Cầu Giấy, Thành phố Hà Nội
© 2024 Semiki inc. All rights reserved.

Yêu cầu SEMIKI báo giá

Hoàn thành biểu mẫu dưới đây để nhận báo giá từ SEMIKI.
Bạn cần nhập đủ tất cả các trường thông tin bên dưới.