TUA VÍT ĐIỆN CÔNG NGHIỆP HIOS BLG-ZERO1 Series

Sản Phẩm

TUA VÍT ĐIỆN CÔNG NGHIỆP HIOS BLG-ZERO1 Series
Giá : Liên hệ
MASP : BLG-4000ZERO1, BLG-5000ZERO1, BLG-5000ZERO1-15, BLG-5000ZERO1-HT
Nhà sản xuất : HIOS JAPAN
Tua vít không chổi than ( súng bắn vít) HIOS JUKUREN "BLG-ZERO1" Tua vít điều khiển kỹ thuật số phát hiện lỗi vặn vít. Ngay cả những người mới bắt đầu cũng có thể dễ dàng vận hành nó bằng cách cài đặt 3 bước đơn giản. Bất cứ ai cũng có thể trở thành một nghệ nhân lành nghề chỉ trong 30 giây sử dụng thiết bị.

Chi tiết Sản phẩm

HIOS

Brushless Screwdriver

Model:

BLG-4000ZERO1 ( 1-5.5 kgf.cm)

BLG-5000ZERO1 ( 2-12 kgf.cm)

JUKUREN "BLG-ZERO1" the digitally controlled screwdriver detects screw fastening errors.

Even a beginner can easily operate it with a simple 3-step settings.

Pic.: HIOS Electric Screwdriver BLG- 4000ZERO1 (Lever Start Type 1-5.5kgf・cm) at Semiki's warehouse

Anyone can be a skilled craftsman in Just 30 Seconds

● Direct Teaching

Setting can be easily done by pressing a button. Time and effort for setting will be significantly saved by directly fastening several screws into the work pieces and allowing the driver to automatically learn the number of rotating pulses of the motor (the setting value is +10% of the maximum count and -10% of the minimum count) from the start to the completion of screw fastening.

●Pulse System
By counting the number of rotating pulses of the motor, the system precisely judges screw fastening errors such as the mixing of a wrong type of screw, a floating screw, a Cam out recess, a stripped screw hole and a cross threaded screw.

● Screw Counter
It displays the remaining number of screws to fasten every time a screw is fastened.

Video: HIOS Electric Screwdriver BLG- 4000ZERO1(Lever Start Type 1-5.5kgf・cm)| intro ( Vietnamese )

OPTIONAL ACCESSORIES: Power Supplies

The Brushless Driver must be operated together with a Power Supply.

Powering the Brushless Driver with the HIOS T-45BL and the T-70BL Power Supply will insure operation of the driver at its full capacity.

Pic.: Power supply is required for DC screwdrivers T-70BL (Hi: DC30V, Low: DC20V) at Semiki's warehouse

Maintenance and calibration :

► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP