-
27.800.000 ₫2× 13.900.000 ₫
ホットライン: +84 979761016
Máy đo độ nhớt loại E TOKISANGYO Nhật Bản (tấm hình nón)
Máy đo độ nhớt loại TP-200E (TP-200EH và TP-200EL)
Máy đo độ nhớt TP-200E là máy đo độ nhớt dạng tấm hình nón có hệ thống kiểm soát nhiệt độ tích hợp.
Tốc độ quay: 0, 0,1 đến 100,0 vòng/phút 0,1 vòng/phút
Các bước: 1.001 bước
Chế độ đo: Đo thủ công/ Tự động dừng theo thời gian/ Tự động dừng độ nhớt/ Đo theo chương trình (tối đa 40 bước)
Bộ nhớ mẫu đo: 10 mẫu mỗi mẫu
Phạm vi đo, phạm vi: Xem phạm vi đo độ nhớt
Chuyển đổi đơn vị: %/mPa・s/ Pa・s /kPa・s (có thể chuyển sang cP/P)
Độ chính xác: Trong phạm vi ±1% của toàn thang đo (khi sử dụng rôto tiêu chuẩn chuyên dụng)
Phạm vi cài đặt nhiệt độ sử dụng: +5°C đến +120°C*2 (Giới hạn trên: nhiệt độ môi trường +50°C, giới hạn dưới: nhiệt độ môi trường -10°C)
Độ phân giải cài đặt nhiệt độ: 0,1°C
The TP-200E viscometer is a cone plate viscometer with an integrated temperature control system.
Equipped with a 4.3-inch LCD color touch panel : the easy-to-read screen improves operability.
When a direct current is passed through the Peltier element used to control the temperature of the TP-200E, heat is transferred from one side to the other, causing one side to generate heat and increase in temperature, while the other side absorbs heat and decreases in temperature. By switching the direction and strength of the electric current, it is possible to control both heating and cooling temperatures . It features quick response temperature control.
Peltier elements are characterized by their fast temperature control response, so by using the temperature program in the included viscosity data import software .
The plate on which the sample is placed is an open type, making it easier to clean.
In conventional viscometers, the gap between the rotor and the plate is adjusted by an analog method, so differences in the operator performing the adjustment are one of the causes of error. The TP-200E has an “Auto Gap” function that
automatically adjusts the gap , so measurements can be performed under the same conditions regardless of who is operating it.
Depending on the viscosity value of the sample to be measured
Low viscosity: L type
High viscosity: H type
It is divided into two models:
Low viscosity (L type) is
“M” , “2.5M” , “5M”
High viscosity (H type) is
“H” , “R” , “U”
It covers three ranges, and has a measurement range equivalent to three
conventional viscometers .
Rotation speed: 0, 0.1 to 100.0 rpm 0.1rpm
Steps: 1,001 steps
Measurement mode: Manual measurement/ Time auto stop/ Viscosity auto stop/ Program measurement (up to 40 steps)
Measurement pattern memory: 10 patterns each
Measurement range, range: See viscosity measurement range
Unit switching: %/mPa・s/ Pa・s /kPa・s (can be switched to cP/P)
Accuracy: Within ±1% of full scale (when using dedicated standard rotor)
Reproducibility: Within ±0.2% of full scale
Data output format: Fixed, comma-separated
Input/output signal:
USB A terminal (for connecting serial printer)/ USB B terminal (for connecting PC) / D-Sub (for Visco-chart software temperature control)
Usage temperature setting range: +5°C to +120°C*2 (Upper limit: ambient temperature +50°C, lower limit: ambient temperature -10°C)
Temperature setting resolution: 0.1°C
Temperature accuracy: ±0.2°C*3 (only when the ambient temperature and the set temperature are equal)
Ambient temperature: 5 to 40°C
Input power: AC100 to 240V*4 50/60Hz
External dimensions (mm): 358 (W) x 398 (D) x 546 (H)
Weight: Approximately 20kg
Equipment configuration: TP-200E main unit / power cable / standard cone (1°34’ x R24) / cone storage case / touch pen / pen holder / injector / dirt prevention sheet (3 sheets) / windshield cover / instruction manual / Data capture and graphing software Visco-chart/USB cable/Temperature control cable (set of 2)
► 校正証明書も添付しております（オプション）
► 一定期間ご使用後は、弊社購入店にて再校正を行ってください。
配布元:
セミキ計装株式会社
電子メール: sales@semiki.com
オフィス電話: +84 28 2253 3522
～あなたのために最善を尽くします～
粘度測定装置
粘度測定装置
粘度測定装置
粘度測定装置
粘度測定装置
粘度測定装置
粘度測定装置
粘度測定装置